FMC2000 User’s Guide
13.4 Time Format
The clock can be set to operate in 12-hour or 24-hour mode.
1. Press Enter to change the time format.
2. Press the up or down arrow to step between the format options
(12-hour or 24-hour).
3. Press Enter to make and save a selection. Press Back to return
to the Basic Settings menu without saving your changes, or
press Exit to return to the monitoring screen without saving
your changes.
13.5 Time
Set the time for the datalogging. The process for changing the time
depends on whether the Time Format is set for 12 Hour or 24
Hour mode.
To set the time in 12 Hour mode:
1. Press Enter to edit the time. The first digit is highlighted by a
blinking box.
2. Change a number by pressing one of the number keys (0
through 9). To skip a digit, press the down or up arrow.
41
To Next Page
Loading...
