Honeywell FMC2000 - Advanced Settings

FMC2000 User’s Guide
13.6 Language
Different languages are supported by the FMC2000, depending on
the firmware version. Scroll from English (the default) to other
languages.
1. Press Enter to change the language.
2. Press the up or down arrow to step through the language
options.
3. Press Enter to make and save a selection. Press Back to return
to the Basic Settings menu without saving your changes, or
press Exit to return to the monitoring screen without saving
your changes.
13.7 Backlight
Press Enter to edit the backlight setting. Choices are On and Off.
1. Press Enter to change the backlight to on or off.
2. Press the up or down arrow to step from on to off (or vice
versa).
3. Press Enter to make and save a selection. Press Back to return
to the Basic Settings menu without saving your changes, or
press Exit to return to the monitoring screen without saving
your changes.
If the backlight setting is Off, the display’s backlight is normally
off. Press any key on the keypad to turn on the backlight. If no
keys are pressed for 20 seconds, the backlight turns off.
43