E MAXPROIntrusion keypad
F MAXPRO Intrusion Remote Power Supply.
The Remote Power Supply needs to be installed in a cabinet.
G MAXPROIntrusion Zone Expander
H MAXPRO Intrusion Relay Module
I MAXPRO Intrusion Door ControlModule
J Central Monitoring Station
K MAXPRO Receiver software
L V-Plex loop with V-Plex devices.
Not all V-Plex devices may be available in all regions. Contact your local
Honeywell Intrusion Sales Representative for more information. The
MPIP3000 series supports two V-Plex loops.
M V-Plex I/O expansion
N V-Plex door/window contacts
O V-Plex motion detection
P V-Plex glass break detection
Q V-Plex holdup devices
R V-Plex fire devices
20 800-23044 Rev. A draft_11
Installation and Setup Guide Honeywell MAXPRO Intrusion MPIP2000U/3000U Series