Honeywell MCT404 - Figure 5-11 Save as File Dialog; Save to File in Offline Mode

5. Managing DE Devices using MC Toolkit Software
5.7. Offline Configuration
Revision 3 MC Toolkit (MCT404) User Manual 105
Save to File in Offline Mode
Selecting Yes adds the current configuration into the current working file.
Selecting No, brings up the “Save As” screen. The location and folder are set to SD Card and
CFG_MCT. You can type in a new name for the file. The default name will be “New1”.
Figure 5-11 Save As File dialog