3. Getting Started
3.3. Safety instructions
18 MC Toolkit (MCT404) User Manual Revision 3
3.3 Safety instructions
General safety instructions
Persons using the unit must observe the standard safety regulations and read the certificate to prevent incorrect
operation or misuse of the unit.
For MCT404
For general safety instructions while using MCT404, refer to the “Safety regulations – General safety
instructions” section of “300011CB02A01_instruction_manual_irocCi70-Ex_EN.pdf” that is shipped
with the MCT404 product
The safety instructions from the above Safety Guide have been updated below as they are
applicable to MCT404 product. The following additional safety regulations must also be
observed:-
- The unit must not be opened within the Ex-area.
- For battery information refer to MCT404 battery replacement section 7.1
- Avoid using the unit in aggressive acidic or alkaline solutions.
- Ensure that the MCT404-X_ Ex unit is not taken in to Zone 0 areas.
- Ensure that the MCT404 - Y_ Ex unit is not taken into Zone 1/0 or 21/20 areas.
- Ensure that the MCT404 - ZZ unit is not taken in to Ex-area.
- Electromagnetic waves, which can arise with the i.roc when using WLAN or Bluetooth functions, can
cause disturbances and endanger your health! Since no definite statements can currently be made about
the immunity from disturbances of heart pacemakers, we recommend users of pacemakers to avoid
using transmitters generally.
- Do not transmit near persons with pacemakers!
- Permission to use electronic devices in airplanes is up to the respective airline.
- Avoid effects of elevated heat: Do not place the device near heat sources, such as radiators, air-
conditioner air exit openings, stoves or other devices (including amplifiers) that radiate heat.
- Avoid effects of moisture.
- Do not put any objects into the product: Do not put objects into the housing or other product openings.
These openings must not be obstructed, blocked or covered.
- Set-up: Never set up the product on a table, vehicle, stand or holder that is not stable. Follow the
manufacturer‘s instructions when setting up or installing the product, and use the accessories
recommended by the manufacturer for installation.
- Adjust loudness: Reduce the volume before using earphones or other audio devices.
To Next Page
Loading...
Need help?
General
