8. Appendix A: Application Notes
8.1. Application Notes
Revision 3 MC Toolkit (MCT404) User Manual 147
File Transfer
File Transfer between Pocket PC and PC is achieved by the ActiveSync/Mobile Device Center interface.
Figure 8-3 ActiveSync/Mobile Device Center file transfer
ActiveSync/Mobile Device Center
Establishes connection between PC and PDA.
Allows you to copy files between PC and PPC once the connection is established.
Allows the MC Toolkit Installation program to install the Application related files
Upload
Allows Upload of Config parameters from the Device to the PDA in Online mode
Save to File
Allows saving current Online configuration to an XML file within the PDA. Also allows editing and
saving the Offline Configuration parameters back to the file – applicable to DE devices using MC
Toolkit application
Save History
Allows saving current Online configuration as a History file within the PDA – applicable to Universal
HART devices using FDC application
Send
Allows writing changes to one or multiple parameters in the Device in Online Mode
Download to Device
In MC Toolkit application, this allows selection of an XML configuration file within the PDA in Offline
mode, load the parameters, Edit and send to the device after establishing connection. In FDC application,
this allows selection of a FDM configuration file within the PDA in Offlline Mode, Load and View the
parameters, select the parameters to be sent to the device after establishing connection.
ActiveSync /
Mobile
Device
Center
Save to File / Save History
Send / Download to Device
To Next Page
Loading...
Need help?
General
