6.3. MC Toolkit application software troubleshooting scenarios
138 MC Toolkit (MCT404) User Manual Revision 3
The current config. file
….XML has reached its limit
of 200 Tag IDs / Records,
please save the configuration
to a new file
The requirement was to support at least 100 Tag IDs. But the
program allows to Save MAX 200 configurations / Tag IDs in the
same file. Once it reaches this limit, you get this message if you
try to save a new configuration to the same file However you
should be able to update any of the 200 configurations without
changing the Tag ID.
Are you sure you want to
leave the Device List screen?
You get this message when you select Back button on the
HART Device List screen. This screen lists all the devices on
the HART network. If you select to go back to the previous
screen without doing download, the program needs to poll the
network again to list the devices
Are you sure you want to
cancel the download?
You get this message when you select Back button with a
selected device from the list, on the HART Device List screen.
This screen lists all the devices on the HART network. If you
select to go back to the previous screen without doing
download, the program needs to poll the network again to list
the devices
To Next Page
Loading...
Need help?
General
