5. Managing DE Devices using MC Toolkit Software
5.5. Online configuration
Revision 3 MC Toolkit (MCT404) User Manual 87
Input Calibration (DE Transmitters) - Correct Input (Zero), LRV, URV; Reset Corrects
This function commands
the transmitter to
overwrite all user input
corrections with factory
default ("characterization")
values.
It is intended for use only
when excessive
corrections render the
transmitter inaccurate.
If corrects should not be
overwritten with factory
values, select the No button.
If corrects need to be
overwritten, select the Yes
button. The timer will appear
briefly, indicating the
operation is performed.