Honeywell NOTIFIER SLC User Manual

Notifier SLC Wiring Manual — P/N 51253:U9 12/3/2021 65
Section 11: Addressable Manual Pull Stations
11.1 Description
The NBG-12LX is an addressable manual pull station with a key-lock reset feature. The NBG-12LXSP is a Spanish/English labeled ver-
sion; NBG-12LXP is a Portuguese-labeled version. Both support FlashScan or CLIP mode. Wiring is the same as for the NBG-12LX
Manual Pull Station.
For more information refer to the Installation Instructions document provided with the devices.
11.1.1 Setting an SLC address
Each unit is factory preset with an address of “00.” To set an SLC address refer to “Setting an SLC Address for a Module” on page 38.
11.2 Wiring a Manual Pull Station
Typical wiring for the NBG-12LX Manual Pull Station to an SLC is shown below.
+
–
–
+
US PAT 4440991
SLC
To next device
on SLC
S
L
C
-
b
l
1
2
l
x
2
.
w
m
f
Figure 11.1 Wiring the NBG-12LX Pull Station to an SLC

Honeywell NOTIFIER SLC Specifications

General

Brand	Honeywell
Model	NOTIFIER SLC
Category	Control Panel
Language	English