Honeywell PC42d User Manual

Appendix B - Default Settings
46 User Instructions for PC42d Desktop Printer
Medium Settings (continued)
Setting
Description
Default Value
Medium length
If the length of the label with intervals or black label exceeds 6
inches (15.54 cm), manual setting of the label’s actual length would
be required when making medium alignment.
1200 points
Editing default value
Check whether the printer is able to print items that are outside the
printable area of the label.
When the setting is 'disabled', and the printer is unable to print any
part of the bar code label because it exceeds the printable area, the
printer will return an error. When the setting is 'enabled', the printer
will print all bar code labels. However it may also print unreadable,
incomplete labels.
Disabled
Start adjustment
Sets the medium length for delivery (positive value) or recover
(negative value) before the printer prints the labels. The unit of
measurement is defined based on "Measurement Unit”
specification. Its range is -9999 to +9999.
-148 points
Stop adjustment
Sets the medium length for delivery (positive value) or recover
(negative value) after the printer prints the labels. The unit of
measurement is defined based on "Measurement Unit”
specification. Its range is -9999 to +9999.
0 point
Medium alignment
mode
Selects the mode used by the printer for aligning medium. If the
printer is unable to identify the intervals between the medium or
markings, it will use "slow speed" mode.
In the case of small labels with intervals, selection of “fast speed”
mode during alignment of medium will reduce wastage of labels.
Slow speed
Length (slow mode)
If the “medium alignment mode" is set at "slow speed", the printer
will in addition to the medium's length, print another 10 mm. The
value is for the additional number of medium to be printed. The unit
of measurement is defined based on "Measurement Unit”
specification. Its range is 80 to 3200..
0 point
Medium
length

Honeywell PC42d Specifications

General

Color	No
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Maximum printing width	104 mm
Display	-
Product color	Black
Ethernet LAN	Yes
USB 2.0 ports quantity	1
Flash memory	128 MB
Internal memory	64 MB
Built-in barcodes	1D, 2D, Code 49, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code
Core diameter	38.1 mm
Maximum label width	110 mm
Maximum label length	0.99 m
Maximum roll diameter	128 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	15 - 80 %

Weight and Dimensions

Depth	174 mm
Width	184 mm
Height	222.5 mm
Weight	1500 g