To Next PageTo Next Page
Need help?Do you have a question about the Honeywell VFD CORE and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | VFD CORE |
| Category | Thermostat |
| Language | English |
Procedures for checking the VFD unit after unpacking and before installation.
Specifies the required distances for proper VFD installation to ensure adequate ventilation and performance.
Illustrates the electrical connections for the main and control circuits of VFDs in Frames A, B, and C.
Illustrates the electrical connections for the main and control circuits of VFDs in Frames D and E.
Explains the configuration options for digital signal input modes, highlighting the common Source Mode.
Details the main circuit power terminals for VFDs in Frames A, B, and C, including AC line and motor connections.
Provides detailed specifications for wire gauge and torque for main circuit terminals across different frames.
Comprehensive specifications for VFDs operating on a 230V power supply, detailing ratings by frame size.
Comprehensive specifications for VFDs operating on a 460V power supply, detailing ratings by frame size.
Lists general system parameters, including VFD identification codes and rated current display settings.
Details fundamental operational parameters such as operating frequency, acceleration/deceleration times, and control modes.
Parameters for configuring various protective functions, including voltage, current, over-torque, and thermal protection.
Fault code and description for over-current during acceleration, with corrective actions for insulation, acceleration time, and VFD sizing.
Fault code and description for DC bus over-voltage during acceleration, with checks for input voltage and regenerative braking.
Fault code and description for IGBT overheating, with checks for ambient temperature, ventilation, and heatsink cleanliness.
