Honeywell Vuquest 3310g User Manual

ii
Control Character Output...........................................2-17
Keyboard Modifiers....................................................2-18
RS232 Modifiers ........................................................2-20
RS232 Baud Rate................................................2-20
RS232 Word Length: Data Bits, Stop Bits,
and Parity ......................................................2-21
RS232 Receiver Time-Out...................................2-23
RS232 Handshaking............................................2-23
RS232 Timeout....................................................2-24
XON/XOFF ..........................................................2-24
ACK/NAK .............................................................2-25
Scanner to Bioptic Communication............................2-25
Scanner-Bioptic Packet Mode .............................2-26
Scanner-Bioptic ACK/NAK Mode.........................2-26
Scanner-Bioptic ACK/NAK Timeout.....................2-26
Chapter 3 - Input/Output Settings
Power Up Beeper ........................................................3-1
Beep on BEL Character...............................................3-1
Trigger Click.................................................................3-1
Good Read and Error Indicators..................................3-2
Beeper – Good Read.............................................3-2
Beeper Volume – Good Read................................3-2
Beeper Pitch – Good Read....................................3-3
Beeper Pitch – Error ..............................................3-3
Beeper Duration – Good Read ..............................3-3
LED – Good Read .................................................3-4
Number of Beeps – Good Read ............................3-4
Number of Beeps – Error.......................................3-4
Good Read Delay ..................................................3-5
User-Specified Good Read Delay..........................3-5
Manual Trigger Modes.................................................3-5
LED Illumination - Manual Trigger .........................3-6
Serial Trigger Mode .....................................................3-7
Read Time-Out ......................................................3-7
Presentation Mode.......................................................3-7

Honeywell Vuquest 3310g Specifications

General

Type	Fixed bar code reader
Sensor type	-
Yaw reading angle	-65 - 65 °
Pitch reading angle	-45 - 45 °
Optical sensor resolution	838 pixels
Light levels (direct sunlight)	0 - 100000 lx
Standard interfaces	PS/2
Connectivity technology	Wired
Input voltage	5 V
Power consumption	450 mA
Power source type	AC
Power consumption (standby)	0.45 W
Power consumption (typical)	2.3 W
Product color	White
International Protection (IP) code	IP53
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	USB

Weight and Dimensions

Depth	74 mm
Width	50 mm
Height	26 mm
Weight	75 g