EasyManuals Logo

Honeywell Vuquest 3310g User Manual

Honeywell Vuquest 3310g
278 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #123 background imageLoading...
Page #123 background image
7 - 9
Full ASCII
If Full ASCII Code 39 decoding is enabled, certain character pairs within
the bar code symbol will be interpreted as a single character. For example:
$V will be decoded as the ASCII character SYN, and /C will be decoded as
the ASCII character #. Default = Off.
Character pairs /M and /N decode as a minus sign and period respectively.
Character pairs /P through /Y decode as 0 through 9.
Code 39 Code Page
Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be
because the bar code being scanned was created using a code page that
is different from the one the host program is expecting. If this is the case,
scan the bar code below, select the code page with which the bar codes
were created (see ISO 2022/ISO 646 Character Replacements on page A-
NUL %U DLE $P
SP SPACE
00@%VPP‘%Wp+P
SOH $A
DC1 $Q !/A 11AAQQa+Aq+Q
STX $B
DC2 $R “/B 22BBRRb+Br+R
ETX $C
DC3 $S #/C 33CCSSc+Cs+S
EOT $D
DC4 $T $/D 44DDTTd+Dt+T
ENQ $E
NAK $U %/E 55EEUUe+Eu+U
ACK $F
SYN $V &/F 66FFVVf+Fv+V
BEL $G
ETB $W ‘/G77GGWWg+Gw+W
BS $H
CAN $X (/H 88HHXXh+Hx+X
HT $I
EM $Y )/I 99IIYYi+Iy+Y
LF $J
SUB $Z */J :/ZJJZZj+Jz+Z
VT $K
ESC %A +/K ;%FKK[%Kk+K{%P
FF $L
FS %B ,/L <%GLL\%Ll+L|%Q
CR $M
GS %C -- =%HMM]%Mm+M}%R
SO $N
RS %D .. >%INN^%Nn+N~%S
SI $O
US %E //O ?%JOO_%Oo+ODEL %T
* Full ASCII Off
Full ASCII On

Table of Contents

Other manuals for Honeywell Vuquest 3310g

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Vuquest 3310g and is the answer not in the manual?

Honeywell Vuquest 3310g Specifications

General IconGeneral
TypeFixed bar code reader
Sensor type-
Yaw reading angle-65 - 65 °
Pitch reading angle-45 - 45 °
Optical sensor resolution838 pixels
Light levels (direct sunlight)0 - 100000 lx
Standard interfacesPS/2
Connectivity technologyWired
Input voltage5 V
Power consumption450 mA
Power source typeAC
Power consumption (standby)0.45 W
Power consumption (typical)2.3 W
Product colorWhite
International Protection (IP) codeIP53
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
Cables includedUSB
Weight and Dimensions IconWeight and Dimensions
Depth74 mm
Width50 mm
Height26 mm
Weight75 g

Related product manuals