Honeywell Vuquest 3310g - Chapter 6 - External Input; Output; External Input; External Trigger Control; External Trigger Polarity

6 - 1
6
External Input / Output
The Vuquest 3310 scanner can be integrated with a variety of third party
devices. The External Trigger and Illumination Controls can be configured
using the bar codes in this chapter. These controls offer simple trigger signals.
An External I/O license and cable are required; contact the nearest technical
support office for further information (see Technical Assistance beginning on
page 14-1).
External Input
External Trigger Control
The External Trigger Control allows object detection from the third party
device to trigger the scanner. If you want to use the third party device
object detection, scan the External Trigger Control On bar code. If you
want to use the 3310 scanner object detection, scan the External Trigger
Control Off bar code. Default = External Trigger Control Off.
External Trigger Polarity
External Trigger Polarity has two states, High and Low. A digital high polar-
ity is 1 and a digital low polarity is 0. If the third party device triggers on low
polarity, 0, scan the External Trigger Polarity Low bar code. Default =
External Trigger Polarity High.
* External Trigger Control Off
External Trigger Control On
* External Trigger Polarity High
External Trigger Polarity Low