Honeywell Vuquest 3310g - Remote Mastermind for USB

2 - 4
CTS/RTS Emulation
ACK/NAK Mode
Remote MasterMind™ for USB
When using a USB interface, you may wish to configure your scanner to
communicate with Remote MasterMind Scanner Management Software
(ReM). Scan the ReM On bar code to communicate with ReM. To disable
this capability, scan ReM Off. Default = ReM On.
CTS/RTS Emulation On
* CTS/RTS Emulation Off
ACK/NAK Mode On
* ACK/NAK Mode Off
ReM Off
* ReM On