Need help?Do you have a question about the HORNER HE-X4A and is the answer not in the manual?
General| Display Type | TFT LCD |
|---|---|
| Backlight | LED |
| Power Supply | 24VDC |
| Contrast Ratio | 500:1 |
| Enclosure Rating | IP65 (front panel) |
| Communication Ports | Ethernet, USB |
| Touch Screen | Resistive |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Shock | 10G, 11ms duration |
Essential safety measures for connecting and operating the device.
Identifies specific warnings like explosion and electrical shock hazards.
Details the physical layout and components of the X4 unit.
Describes how the X4 connects to other devices and networks.
Details specific features of the X4, like its profile and display capabilities.
Guides on physically mounting the X4 unit in a panel.
Covers electrical connection requirements and grounding procedures.
Explains the meaning of the OCS status LED indicators.
Details how to navigate the OCS System Menu.
Configures network parameters like ID, baud rate, IP address, and gateway.
Covers configuration of serial ports, including default programming port.
Procedures for calibrating analog and digital I/O points for accuracy.
Features for maintaining operation during soft failures and data backup/restore.
Allows duplicating application and settings for easy unit replacement or replication.
Procedure for adjusting touch screen sensitivity and accuracy.
Explains different types of system registers and their purpose.
Details system status (%S) and control (%SR) registers and their functions.
Maps I/O functions to registers and lists resource limitations.
Provides an overview of the X4's digital and analog I/O capabilities.
Configures digital inputs and high-speed counter functions.
Configures digital and PWM outputs, including stop states.
Sets up analog input channels, modes, and filtering.
Configures analog output channels, modes, and stop states.
Explains how to view I/O status and perform calibration.
Detailed explanation of High-Speed Counter functions like frequency, totalize, and quadrature.
Details Pulse Width Modulation functions, duty cycle, frequency, and examples.
Covers serial port configuration, wiring, and programming methods.
Details CAN port wiring, programming, and network setup.
Guides on configuring the Ethernet module, including IP parameters.
Introduces the concept of loadable protocol device drivers for device communication.
Outlines screen capabilities and methods for navigating between screens.
Covers how data is displayed and entered using objects and keypads.
Explains how alarms are presented, viewed, and acknowledged.
Describes the UI for removable media access, screen saver, and brightness.
Details microSD card installation, file system, and manager.
Covers logging data, capturing screens, and using function blocks.
Explains filename conventions and registers related to removable media.
Allows duplicating application and settings for easy unit replacement or replication.
Features for maintaining operation during soft failures and data backup/restore.
Explains Modbus operation as a slave and master device.
Provides a mapping of OCS registers to Modbus addresses and commands.
Covers checking revision, details, download, and general update steps.
Step-by-step guide for updating firmware using a microSD card.
Instructions for safely replacing the internal backup battery.
Guides on establishing communication between Cscape and the OCS.
Troubleshooting steps for I/O, CsCAN networks, and USB interfaces.
General troubleshooting tips and contact information for technical assistance.
To Next Page