horsch FOCUS ST - Page 2

EC Declaration of Conformity
exchangeable equipment
(RL 2006/42/EC)
The manufacturer HORSCH Maschinen GmbH
Sitzenhof 1
D-92421 Schwandorf
hereby declares, that the product,
Designation of machine: Drill unit
Machine type: from serial no. 24341250 Focus 4 TD M14
24361250 Focus 6 TD M14
24361250 Focus 7 TD M14
24411250 Focus 6 TD 3-P
24371250 Focus 8.75 ST
24391250 Focus 8.90 ST
24401250 Focus 12.75 ST
this declaration refers to, conforms with all relevant fundamental health and safety requirements
of the EC directive 2006/42/EC.
For proper implementation of the heath and safety requirements mentioned in the EC-directive,
the following standards and technical speci󰘰cations have been used:
- EN 894-4 : 09-2010
- EN 1853 : 02-2010
- EN ISO 4254-1 : 05-2011
- EN ISO 4413 : 04-2011
- EN ISO 4414 : 04-2011
- EN 14018 : 02-2010
Schwandorf, 27.09.2014 Documentation Representative:
Place and date Manfred Köbler
____________________ ____________________
M. Horsch P. Horsch
(CEO) (Development and Engineering)