horsch FOCUS ST - Introduction; Foreword; Notes on Representation

Introduction
Foreword
Before operating the machine, read and strictly
comply with the operating instructions. In doing
so, you will avoid accidents, reduce repair costs
and downtime and increase the reliability and
service life of your machine. Pay attention to
the safety notices!
HORSCH will not assume liability for any dam-
age or malfunctions resulting from failure to
comply with the operating instructions.
These operating instructions will assist you in
getting to know your machine and in using it cor-
rectly for its intended purposes.
The operating instructions must be read and
strictly adhered to by all persons working on or
with the machine e.g.:
• Operation (including preparation, fault recti󰘰-
cation during work, servicing)
• Maintenance (maintenance and inspection)
• Transport
Together with the operating instructions, you
also receive an acknowledgement of receipt.
The trained personnel of our service and sales
partners will train and instruct you in the opera-
tion and maintenance of your machine. You or
the service engineer should pass the acknowl-
edgement of receipt on to the sales partner.
This con󰘰rms your formal acceptance receipt
of the machine.
The warranty period starts with the date of
delivery.
We reserve the right to alter illustrations as well
as technical data and weights contained in these
operating instructions for the purpose of improv-
ing the machine.
The illustrations in these operating instructions
show di󰘯erent versions of the implement and
di󰘯erent equipment variants.
Notes on representation
Warning notes
These operating instructions di󰘯erentiate be-
tween three di󰘯erent types of warning notes.
The following signal words with warning sym-
bols are used:
DANGER
Highlights a danger that will lead to death or
severe injury, if it is not avoided.
WARNING
Highlights a danger that can lead to death or
severe injury, if it is not avoided.
CAUTION
Highlights a danger that can lead to injury, if it
is not avoided.
Please read the warning notes given in these
operating instructions!
Instructions
In the operating instructions all instructions for
actions are identi󰘰ed by arrow heads
¾ ...
¾ ...
If compliance with a certain sequence is re-
quired, the steps of actions are successively
numbered.
1. ...
2. ...
3. ...
...
Identi󰘰es important notes.
The designations “right”, “left”, “front” and “rear”
apply as seen in travel direction.
4