Parking
Park the machine only on a rm and level sur-
face. The machine can be parked folded up in
transport position.
DANGER
There is a possibility that persons may become
crushed and severely injured between machine
and tractor!
Instruct persons to leave the area between trac-
tor and machine.
¾ Lift the machine completely.
¾ Unfold the machine completely, if necessary.
¾ Fold the support leg out and secure it with
the bolt.
Parking support
¾ Lower the machine on the parking support.
¾ Apply the parking brake (optional) and secure
the machine against rolling away.
¾ Unhitch the machine.
¾ Disconnect the lines between tractor and
machine.
¾ With swinging drawbar hitching close the lock
valve on the drawbar.
Unfolding
WARNING
Dropping / lowering machine parts can cause
severe crush injuries etc.!
Instruct persons to leave the danger zone. Comply
with the accident prevention instructions.
¾ Perform folding operations only on level, rm
ground.
¾ Lift the machine completely.
¾ In E-Manager choose "Wings" and operate
the control unit.
¾ Unfold the machine, until the pressure gauge
shows min. 80 bar. The step on the hopper is
automatically extended.
¾ Switch the control unit to neutral position.
¾ Slightly lift the machine to be able to remove
aluminium clips from the packer cylinder.
¾ In case of swinging drawbar hitching remove
the clips from the drawbar cylinder.
46
To Next Page
Loading...
