HP 10000 G2 Series Installation Guide

Rear Extension kit 106
2.
Lift the rear doors off the hinge brackets, and then remove the doors from the rack (2).
3. Using a T-30 Torx screwdriver, remove the M6 flathead screw securing each hinge bracket to the rack
(1), and then remove all of the hinge brackets from the rack (2). Retain the hinge brackets and screws
for reinstallation.

HP 10000 G2 Series Specifications

General

Rack Height	42U
Weight Capacity	2000 lbs
Color	Black
Product Type	Rack
Material	Steel
Adjustable Leveling Feet	Yes
Cable Management	Yes
Mounting Type	Floor-standing
Width	24 inches
Height	78.7 inches
Compatible Devices	HP Servers