Server/Utility Shelf kit 112
Server/Utility Shelf kit
About this device
The HP Server/Utility Shelf kit enables you to install a convenient shelf in your rack-mount system. This kit can
be used with all HP racks.
Kit contents
Item Quantity
Server/Utility shelf
1
Cage nut
2
M6 screw
2
Quick-release tie-down straps
2
This kit might contain extra hardware for your convenience.
Required tools
The following tools are required for installation:
• Phillips screwdriver
• Cage nut insertion tool
Installing the server/utility shelf
Always plan the rack installation so that the heaviest item is on the bottom of the rack. Install the heaviest item
first, and then continue to populate the rack from the bottom to the top.
To Next Page
Loading...
