HP 10000 G2 Series Installation Guide

Baying kit 25
Baying kit
About this device
The HP Baying kit enables you to connect multiple racks of the same series (HP 10000 and 10000 G2 Series
Racks), height, and depth. For example, two HP 10622 Racks can be bayed together, as well as two HP
10842 Racks.
Kit contents
Item Quantity
24-inch baying brackets
6
600-mm baying brackets
6
T-30 Torx screws
15
Extra hardware might be included for your convenience.
Required tool
You will need a T-30 Torx driver.
Installing the baying kit
WARNING: To reduce the risk of personal injury or damage to the rack and equipment, the
racks must be positioned and secured together according to these instructions. Failure to do so
could result in an unstable installation.
NOTE: The appearance of the rack might vary depending on the model of the rack purchased.

HP 10000 G2 Series Specifications

General

Rack Height	42U
Weight Capacity	2000 lbs
Color	Black
Product Type	Rack
Material	Steel
Adjustable Leveling Feet	Yes
Cable Management	Yes
Mounting Type	Floor-standing
Width	24 inches
Height	78.7 inches
Compatible Devices	HP Servers