Ground Bonding kit 64
3.
Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the left rear
door and tighten.
From the left rear door to the left rear door cable access panel:
1. Place one end of a 15.24-cm (6-in) grounding strap over the same grounding lug on the left rear door.
2. Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the left rear
door and tighten.
3. Place the other end of the same grounding strap over the grounding lug on the cable access panel.
4. Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the cable
access panel and tighten.
From the system chassis rail to the rack top:
1. Insert a T-25 Torx screw through on end of a 15.24-cm (6-in) grounding strap and secure it to the system
chassis rail.
2. Place the other end of the same grounding strap over the grounding lug on the rack top.
To Next Page
Loading...
