HP 10504 - Page 84

78
Table 33 QSFP+ module specifications
Product
code
Description Connector
Fiber
specifications
Multimode
fiber modal
bandwidth
(MHz*km)
Maximum
transmission
distance
JG325A
HP X140 40G QSFP+
MPO SR4 Transceiver
MPO
MULTIMODE
50/125μm
OM3
2000
100 m (328.08
ft)
JG661A
HP X140 40G QSFP+
LC LR4 SM 10km
1310nm Transceiver
LC 9/125 μm SMF
N/A
10 km (6.21
miles)
IMPORTANT:
A
ll Comware V7 software versions (with the version number R2XXX) support the HP X140 40G QSFP+ LC
LR4 SM 10km 1310nm Transceiver (JG661A). For the Comware V5 software versions (with the version
number R1XXX), only Release 1208P03 and later versions support this type of transceiver module.
Table 34 QSFP+ cable specifications
Product code Descri
p
tion Cable len
g
th
Remarks
JG326A
HP X240 40G QSFP+ QSFP+ 1m
Direct Attach Copper Cable
1 m (3.28 ft)
Used for connecting 40 Gbps
QSFP+ ports.
JG327A
HP X240 40G QSFP+ QSFP+ 3m
Direct Attach Copper Cable
3 m (9.84 ft)
JG328A
HP X240 40G QSFP+ QSFP+ 5m
Direct Attach Copper Cable
5 m (16.40 ft)
Table 35 QSFP+ to SFP+ cable specifications
Product code Descri
p
tion Cable len
g
th
Remarks
JG329A
HP X240 40G QSFP+ to 4x10G
SFP+ 1m Direct Attach Copper
Splitter Cable
1 m (3.28 ft)
Used for connecting a 40
Gbps QSFP+ port to four 10
Gbps SFP+ ports.
JG330A
HP X240 40G QSFP+ to 4x10G
SFP+ 3m Direct Attach Copper
Splitter Cable
3 m (9.84 ft)
JG331A
HP X240 40G QSFP+ to 4x10G
SFP+ 5m Direct Attach Copper
Splitter Cable
5 m (16.40 ft)