HP 5820X Series

To Next Page

To Previous Page

195

[SwitchC] vlan 101

[SwitchC-vlan101] arp detection enable

[SwitchC-vlan101] vlan 201

[SwitchC-vlan201] arp detection enable

[SwitchC-vlan201] vlan 301

[SwitchC-vlan301] arp detection enable

[SwitchC-vlan301] vlan 102

[SwitchC-vlan102] arp detection enable

[SwitchC-vlan102] vlan 202

[SwitchC-vlan202] arp detection enable

[SwitchC-vlan202] vlan 302

[SwitchC-vlan302] arp detection enable

[SwitchC-vlan302] vlan 103

[SwitchC-vlan103] arp detection enable

[SwitchC-vlan103] vlan 203

[SwitchC-vlan203] arp detection enable

[SwitchC-vlan203] vlan 303

[SwitchC-vlan303] arp detection enable

[SwitchC-vlan303] vlan 104

[SwitchC-vlan104] arp detection enable

[SwitchC-vlan104] vlan 204

[SwitchC-vlan204] arp detection enable

[SwitchC-vlan204] vlan 304

[SwitchC-vlan304] arp detection enable

[SwitchC-vlan304] vlan 501

[SwitchC-vlan501] arp detection enable

[SwitchC-vlan501] vlan 502

[SwitchC-vlan502] arp detection enable

[SwitchC-vlan502] vlan 503

[SwitchC-vlan503] arp detection enable

[SwitchC-vlan503] quit

# Configure uplink policies p1 and p2 to enable one SVLAN to transmit the same type of traffic from

different customers.

[SwitchC] traffic classifier c1

[SwitchC-classifier-c1] if-match customer-vlan-id 101 to 102

[SwitchC-classifier-c1] traffic classifier c2

[SwitchC-classifier-c2] if-match customer-vlan-id 201 to 202

[SwitchC-classifier-c2] traffic classifier c3

[SwitchC-classifier-c3] if-match customer-vlan-id 301 to 302

[SwitchC-classifier-c3] traffic classifier c4

[SwitchC-classifier-c4] if-match customer-vlan-id 103 to 104

[SwitchC-classifier-c4] traffic classifier c5

[SwitchC-classifier-c5] if-match customer-vlan-id 203 to 204

[SwitchC-classifier-c5] traffic classifier c6

[SwitchC-classifier-c6] if-match customer-vlan-id 303 to 304

[SwitchC-classifier-c6] quit

[SwitchC] traffic behavior b1

[SwitchC-behavior-b1] remark service-vlan-id 501

Table of Contents

Related product manuals