HP 8168E - Page 102

5
:STATus:OPERation:NTRansition
Syntax :STATus:OPERation:NTRansition < wsp >< value >
Description This command sets the bits in the NTRansition register. Setting
a bit in this register enables a negative transition (1 ! 0) in the
corresponding bit in the CONDition register to set the bit in the
EVENt register.
:STATus:OPERation:NTRansition?
Syntax :STATus:OPERation:NTRansition?
Description This query returns the current contents of the
OPERation:NTRansition register.
Example OUTPUT 724;":STAT:OPER:NTR 768"
OUTPUT 724;":STAT:OPER:NTR?"
ENTER 724;A$
:STATus:OPERation:PTRansition
Syntax :STATus:OPERation:PTRansition < wsp >< value >
Description This command sets the bits in the PTRansition register. Setting
a bit in this register enables a positive transition (0 ! 1) in the
corresponding bit in the CONDition register to set the bit in the
EVENt register.
:STATus:OPERation:PTRansition?
Syntax :STATus:OPERation:PTRansition?
Description This query returns the current contents of the
OPERation:PTRansition register.
Example OUTPUT 724;":STAT:OPER:PTR 768"
OUTPUT 724;":STAT:OPER:PTR?"
ENTER 724;A$
5-32 Remote Commands