127
Chapter 6, Call Processing Subsystem
The CALL CONTROL Screen
SAT:
SAT: is divided into two fields:
he left-hand field displays the SAT frequency assigned to the voice channel being used by
the Test Set and the mobile station. A numeric value would only be displayed when the
Test Set’s Connected annunciator is lit (connected state). A “-” is displayed if a mobile
station is not actively connected on a voice channel.
The right-hand field (highlighted field) is used to set the SAT Color Code (SCC) to be
used on the designated voice channel (Chan: field description, on page 120 for more
information about the voice channel).
SCM:
This field displays the decoded station class mark information received from the
mobile station on the reverse control channel in response to a forward control
channel message. The SCM: field is displayed only when the Display field is set
to Data and a reverse control channel message has been decoded.
SID
This field is used to set the system identification number (SID) of the Test Set.
The SID field is an immediate action field. If the field is selected and changed, the
signaling message(s) being sent on the forward control channel are immediately
changed. No change occurs to the current state (that is, active, register, page,
access, connect) of the Call Processing Subsystem.
To Next Page
