485
Chapter 22, Tests Screen
TESTS (External Devices)
Addr
This field is used to enter the instrument’s remote address. For HP-IB instruments,
enter the full 3-digit address (such as 704).
Calling Name
The Calling Name field is used to enter the instrument’s function (in upper-case
letters). For example, PRINTER, POWER SUPPLY, DATA COLLECTION (disk
drive), and so forth.
Delet Ins
This field allows you to delete an instrument from the list at the bottom of the
screen.
Use the knob, up-arrow, or down-arrow key to select the step where you want to
delete an instrument.
External Disk Specification
This field is used when storing and loading procedures on an external disk.
Operating Considerations
The HP-IB path entered in the External Disk Specification field is used
by the Select Procedure Location: field on the TESTS (Main Menu)
screen when
Disk is selected.
Insrt Ins
This field allows you to enter an instrument in the list at the bottom of the screen.
Use the knob, up-arrow, or down-arrow key to select the step where you want to
insert an instrument.
See Also
Programmer’s Guide
To Next Page
Loading...
