143
Chapter 6, Call Processing Subsystem
CALL DATA Screen
Register
This field is used to initiate a registration of the mobile station connected to the
Test Set. The Test Set must be in the active state (that is, the Active annunciator
lit) before you can attempt to register a mobile station.
[] Register
When lit, the Register annunciator indicates that the mobile station connected
to the Test Set is being commanded to register with the base station.
Release
This field is used to terminate an active voice channel connection to the mobile
station. When the Release field is selected, a mobile station control message
with a release order is sent to the mobile station on the forward voice channel. A
mobile station must be actively connected on a voice channel to the Test Set (that
is, the Connect annunciator must be lit) before you can attempt to send a release
order to the mobile station.
To Next Page
Loading...
