157
Chapter 6, Call Processing Subsystem
Using the CALL DATA Screen
12. Select the Display Word field. A list of reverse channel words which can be dis-
played will appear in a Choices: menu. Select the desired word from the list of
choices. The decoded contents for each of the fields in the selected word will be dis-
played in the lower portion of the display.
13. If a word is chosen which was not part of the decoded reverse channel’s message
stream, all the fields will be blank when it is displayed.
See "CALL DATA Screen Message Field Descriptions" on page 144
for a
description of each of the available reverse channel words.
Step 11. and step 12. in the above procedure can be reversed, that is - the desired
word can be selected first, then the mobile station can be handed off. If the
handoff is successful, the contents of each display word contained in the reverse
control channel’s message stream will be updated when the decoding is complete.
The handoff does not have to happen while you are viewing the CALL DATA
screen. When the CALL DATA screen is viewed, the contents of the display
words will contain the decoded data from the last successful call processing
function (registration, origination, page, release, order).
To Next Page
