Cable Management
The HP AdvanceStack hubs have been designed to help you with the
problem of managing your network cables. On the right side of each hub
is a built-in cable management bar.
The bars have slots in them that you can use for tie-wrapping the
network cables.
Additionally, included in the hub’s accessory kit are some specialized
cable ties that allow you to wrap the cables and then attach the bundle
to the cable management bar, as shown in the illustration below.
In some instances, all the cables will not fit inside the post on the cable
management bar. The specialized cable tie can be used to bundle the
extra cables and hang them on the outside of the post.
cable management bars
specialized cable tie
Installing the
HP AdvanceStack Hubs
Installing the HP AdvanceStack 10Base-T Hubs
1-19
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
