Managing Your Hub —
HP Distributed Management
One of the key features of the HP AdvanceStack family of hubs is the
ease with which a hub can be managed. There are two main
management options:
Out-of-band management from a PC running HP Stack Manager
connected to the RS-232 console port of any of the hubs in the stack.
In-band management from a network management station running
HP Interconnect Manager anywhere on the network that the hubs
are in.
PC running HP Stack Manager
connected to the hub stack or an
ASCII terminal emulator
Network management station
on the LAN, running
HP Interconnect Manager (ICM)
HP Ethernet
SNMP Module
(required for ICM and
the ASCII terminal)
distributed management chain
Hub Reference
Hub Reference
3-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
