HP AdvanceStack 10Base-T Hub-12 User Manual

Twisted-Pair Cable Pin Assignments
Twisted-Pair Straight-Through Cable
Hub End Computer or
Transceiver End
Signal
Pins Pins
Signal
(receive +)
(receive –)
(transmit +)
(transmit –)
1
2
3
6
1
2
3
6
(transmit +)
(transmit –)
(receive +)
(receive –)
Twisted-Pair Crossover Cable
Hub 1-end Hub 2-end
Signal
Pins Pins
Signal
(receive +)
(receive –)
(transmit +)
(transmit –)
1
2
3
6
6
3
2
1
(transmit –)
(transmit +)
(receive –)
(receive +)
ThinLAN Cable Requirements
The thin coaxial cables used with the HP AdvanceStack 10Base-T Hubs
must comply with the IEEE 802.3 Type 10Base2 requirements. Some
RG-58 A/U or RG-58 C/U cables meet these requirements.
The maximum length of a single thin coaxial cable segment is 185 meters.
The minimum length (for example, to connect adjacent hubs in a rack)
is 0.5 meter.
Cables and Connectors
Cables and Connectors
A-7
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

HP AdvanceStack 10Base-T Hub-12 Specifications

General

Brand	HP
Model	AdvanceStack 10Base-T Hub-12
Category	Switch
Language	English