MIB (Management Information Base) Support
The HP AdvanceStack 10Base-T Hub with an installed HP Ethernet SNMP
Module supports the following MIB standards: MIB-II (RFC 1213), IEEE
802.3 Repeater MIB (RFC 1516), and IEEE 802.3 MAU MIB (RFC 1515).
In addition, the hub implements HP MIB extensions that are available on
request. Contact your HP-authorized LAN dealer or local HP sales office.
Using HP Network Management
HP offers an SNMP-compliant network management product that can
manage your HP AdvanceStack hub (HP Interconnect Manager). This
product uses a windowing interface to:
manage multiple HP hubs and other HP network devices, including
a “chain” of HP AdvanceStack hubs
automatically generate a graphic display of the network map
gather network traffic statistics
enable and disable ports
configure port security and other security features on the hub
run tests of the hub
test network links to other devices
Using Non-HP Network Management
To manage an HP AdvanceStack hub from a non-HP network
management product, you must first obtain HP’s MIB extensions.
Contact your HP-authorized LAN dealer or local HP sales office for more
information.
Security Features
If you have installed an HP Ethernet SNMP Module in your
HP AdvanceStack 10Base-T Hub, your hub has these security features:
port security
authorized managers list
password protection
Hub Reference
Hub Reference
3-10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
