HP Armada 7300 - Using Removable Drives; Customizing the Device Bays

6-10 Working with Removable Drives
Writer: Cheryl Love Saved by: Rebecca Wiggins Saved date: 08/12/97 10:13 AM
Part Number: 247738-002 File name: Ch06.doc
Removing a Drive from the MultiBay Adapter
That Has One Release Latch
To remove a drive from the Armada 7000 Removable Drive
MultiBay Adapter that has one release latch on the right side:
1. Apply light pressure to both the top and bottom of the release
latch on the right side of the adapter and pull it out slightly
1
.
2. Push forward on the back of the drive
2
(without touching the
connector) until you can grasp the front of the drive.
3. Slide the drive out of the adapter
3
.
NOTE:
Store the adapter in the MultiBay device carrying case.
Removing a Drive from a MultiBay Adapter That Has One Release Latch