Working with Removable Drives 6-11
Writer: Cheryl Love Saved by: Rebecca Wiggins Saved date: 08/12/97 10:13 AM
Part Number: 247738-002 File name: Ch06.doc
Removing a Drive from the MultiBay Adapter
That Has Two Release Latches
To remove a drive from the Armada 7000 Removable Drive
MultiBay Adapter that has two release latches on the bottom:
1. Slide the two release latches on the bottom of the adapter away
from the center of the adapter until they click into the
unlocked position
1
.
2. Push forward on the back of the drive
2
(without touching the
connector) until you can grasp the front of the drive.
3. Remove the drive from the adapter
3
.
4. Slide the two release latches toward the center of the adapter
until they click into the locked position
4.
NOTE:
Store the adapter in the MultiBay device carrying case.
Removing a Drive from a MultiBay Adapter That Has Two Release Latches
To Next Page
Loading...
