HP BladeSystem c-Class Troubleshoot Manual

HP BladeSystem c-Class Enclosure
Troubleshooting Guide
Abstract
This document is for the person who installs, administers, and troubleshoots HP BladeSystem c-
Class products. Only persons experienced in server
blade technology and configuration should
attempt these procedures. HP assumes you are qualified in the servicing of computer equipment and
trained in recognizing hazards in products with hazardous energy levels.
Part Number: 460224-003
May 2011
Edition: 3

HP BladeSystem c-Class Specifications

General

Enclosure Type	Blade Enclosure
Enclosure Height	10U
Maximum Blades Supported	16
Maximum Number of Half-Height Blades	16
Maximum Number of Full-Height Blades	8
Number of Blade Bays	16
Redundant Power Supplies	Yes
Max Power Supply Units	6
Redundant Fans	Yes
Management	HP Onboard Administrator
Integrated Management	Yes
Power Supply	Hot-plug, redundant power supplies
Cooling	Redundant, hot-swappable fans
Network Connectivity	Ethernet, Fibre Channel
Interconnect Modules Supported	Ethernet, Fibre Channel, InfiniBand, iSCSI, SAS, Virtual Connect
Compatible Blades	HP ProLiant Blade Servers
Cooling Fans	10 hot-swappable fans