Removal and Replacement Procedures
4-11
Table 4-1
Drive Positions
Item Component Description
1
Bay 1
Part of the removable hard drive cage. A 3.5-inch, third-height
bay that supports a 1.0-inch hard drive or a 1.6-inch hard
drive.
2
Bay 2 Part of the removable hard drive cage. A 3.5-inch, third-height
bay that supports a 1.0-inch hard drive. Bay 2 is not available
when a 1.6-inch hard drive is installed in either bay 1 or
bay 3.
3
Bay 3 Part of the removable hard drive cage. A 3.5-inch, third-height
bay that supports a 1.0-inch hard drive or a 1.6-inch hard
drive.
4
Bay 4 5.25-inch, half-height bay that supports 1.0-inch or 1.6-inch
storage devices. Either a CD-ROM drive or DVD-ROM drive is
shipped in bay 4.
5
Bay 5* 5.25-inch, half-height bay that supports 1.0-inch or
1.6-inch storage devices.
6
Bay 6* 5.25-inch, half-height bay that supports 1.0-inch or 1.6-inch
storage devices.
7
Bay 7 3.5-inch, third-height bay that supports a 1.0-inch device. A
standard 3.5-inch diskette drive is shipped in bay 7.
* An optional Zip drive can be installed in bay 5 or 6.
CAUTION:
If a drive is not installed in bays 5 or 6 or if the bays are empty, be
sure an EMI/cooling shield is installed to ensure proper airflow and cooling.
To Next Page
Loading...
Need help?
General