HP EliteDesk 800 G1 Small Form Factor Service Manual

6. Remove the drive cage (Drive cage on page 164).
7. Remove the heat sink (
Heat sink on page 157).
8. Remove the system board (
System board on page 171).
9. Remove the rear fan (
Rear fan on page 173).
10. To remove the front antenna, from the inside of the front of the chassis, remove the antenna from
the clips built into the base pan.
11. From the outside of the front of the chassis, remove the two Torx T8 screws (1) that secure the
antenna to the chassis.
Antennas
175

HP EliteDesk 800 G1 Small Form Factor Specifications

General

Brand	HP
Model	EliteDesk 800 G1 Small Form Factor
Category	Desktop
Language	English