HP EliteDesk 800 G1 Small Form Factor Service Manual

Front bezel security
The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1. Prepare the computer for disassembly (
Preparation for disassembly on page 44).
2. Remove the access panel (
Access panel on page 45)
3. Remove the security screw from the side of the hard drive bay just behind the front panel.
4. Install the security screw through the middle front bezel release tab to secure the front bezel in
place.
46 Chapter 5 Removal and replacement procedures: Tower (TWR)

HP EliteDesk 800 G1 Small Form Factor Specifications

General

Brand	HP
Model	EliteDesk 800 G1 Small Form Factor
Category	Desktop
Language	English