261
Field Description
Power source type of an LLDP neighboring device that is a PD
device:
• Unknown—Unknown power supply.
• PSE—PSE power supply.
• Local—Local power supply.
• PSE and local—PSE and local power supplies.
Power priority
This field appears only on the devices that support PoE.
PoE power receiving priority of ports on an LLDP neighboring
device that is a PD device:
• Unknown.
• Critical.
• High.
• Low.
PD requested power value
This field appears only on the devices that support PoE.
Power (in watts) that the LLDP neighboring device that is a PD
device requests.
PSE allocated power value
This field appears only on the devices that support PoE.
Power (in watts) that the PSE provides to the LLDP neighboring
device that is a PD device.
Link aggregation supported Indicates whether link aggregation is supported.
Link aggregation enabled Indicates whether link aggregation is enabled.
TLV type Unknown basic TLV type.
TLV information Information contained in the unknown basic TLV type.
Unknown organizationally-defined
TLV
Unknown organizationally specific TLV.
TLV OUI OUI of the unknown organizationally specific TLV.
TLV subtype Unknown organizationally specific TLV subtype.
Index Unknown organization index.
Capabilities
Capabilities enabled on the neighboring device:
• Repeater—Signal repeating is enabled.
• Bridge—Switching is enabled.
• WlanAccessPoint—The neighboring device is serving as a
wireless AP.
• Router—Routing is enabled.
• Telephone—The neighboring device is serving as a
telephone.
• DocsisCableDevice—The neighboring device is serving as
a DOCSIS-compliant cable device.
• StationOnly—The neighboring device is serving as a station
only.
• Other—Functions other than those listed above are
supported.
• None—The neighboring device does not advertise this TLV.
Local Interface Local port that receives the LLDP information.
Chassis ID : * -- -- Nearest nontpmr
bridge neighbor
#-- -- Nearest customer
Chassis ID flag:
• An asterisk (*) indicates the nearest non-TPMR bridge
neighbor.