CLI commands
radius-server deadtime
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
radius-server deadtime <seconds>
Sets the retry interval for access and accounting requests that time-out.
If no reply is received within this interval, the AP switches between the primary and secondary
RADIUS servers (if defined). If a reply is received after the interval expires, it is ignored.
Parameters
<seconds> Retry interval. Range: 2 - 60 seconds.
radius-server host
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
radius-server host <primary>[<secondary>]
Sets the addresses of the primary and secondary RADIUS servers.
Parameters
<primary> IP address of the primary RADIUS server.
<secondary> IP address of the secondary RADIUS server.
radius-server key 2
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
radius-server key <primary>[<secondary>]
Enter primary and secondary secrets.
Parameters
<primary> Shared secret for the primary RADIUS server.
<secondary> Shared secret for the secondary RADIUS server.
radius-server message-authenticator
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
radius-server message-authenticator
Include the message authenticator attribute in RADIUS packets.
no radius-server message-authenticator
Do not include the message authenticator attribute in RADIUS packets.
radius-server name
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
radius-server name <name>
Changes the name of the RADIUS profile.
2-74
To Next Page
Loading...
