CLI commands
soap-server http authentication password
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
soap-server http authentication password
Set the SOAP server HTTP authentication password.
soap-server http authentication username
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
soap-server http authentication username
Set the SOAP server HTTP authentication username.
soap-server port
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
soap-server port <port number>
Sets the port the AP will use to respond to SOAP requests.
Parameters
<port number> SOAP port number. Range 1 - 65535.
soap-server ssl
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
soap-server ssl
SSL enabled for SOAP server.
no soap-server ssl
SSL disabled for SOAP server.
soap-server ssl with client certificate
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
soap-server ssl with client certificate
Enable the use of client certificate with SSL for SOAP server.
no soap-server ssl with client certificate
Disable the use of client certificate with SSL for SOAP server.
soap-server access interface gre
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
soap-server access interface gre <name>
Enables access to SOAP via the specified GRE tunnel.
no soap-server access interface gre <name>
Removes access to SOAP via the specified GRE tunnel.
2-26
To Next Page
Loading...
Need help?
General
