CLI commands
snmp-server trap wireless-deauthentication-fail
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap wireless-deauthentication-fail
Send a trap when a wireless client station fails to deauthenticate from the AP.
no snmp-server trap wireless-deauthentication-fail
Do not send this trap.
snmp-server trap wireless-deauthentication-success
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap wireless-deauthentication-success
Send a trap when a wireless client station deauthenticates from the AP.
no snmp-server trap wireless-deauthentication-success
Do not send this trap.
snmp-server trap wireless-disassociation-fail
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap wireless-disassociation-fail
Send a trap when a wireless client station fails to disassociate from the AP.
no snmp-server trap wireless-disassociation-fail
Do not send this trap.
snmp-server trap wireless-disassociation-success
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap wireless-disassociation-success
Send a trap when a wireless client station disassociates from the AP.
no snmp-server trap wireless-disassociation-success
Do not send this trap.
snmp-server trap wireless-reassociation-fail
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap wireless-reassociation-fail
Send a trap when a wireless client station fails to reassociate with the AP.
no snmp-server trap wireless-reassociation-fail
Do not send this trap.
snmp-server trap wireless-reassociation-success
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap wireless-reassociation-success
Send a trap when a wireless client station reassociates with the AP.
2-29
To Next Page
Loading...
