HP MSM3xx

CLI commands
radius-server nasid
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
radius-server nasid <id>
Sets the network access server ID you want to use for the AP.
By default, the serial number of the AP is used. The AP includes the NAS-ID attribute in all packets
that it sends to the RADIUS server.
radius-server timeout
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
radius-server timeout
Activates RADIUS timeout.
no radius-server timeout
Disables RADIUS timeout.
radius-server timeout
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
radius-server timeout <number>
Sets the total timeout for RADIUS requests.
no radius-server timeout
Disables RADIUS timeout.
2-75