CLI commands
clock custom dst ends
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
clock custom dst end <day> <weekday> <month> <time>
Set parameters of the rule defining the end of daylight savings time.
Parameters
<day> Day of the month. Range 1 - 31.
<weekday> Weekday. Valid values are: "sun", "mon", "tue", "wed", "thu", "fri", "sat".
<month> Month. Valid values are: "jan", "feb", "mar", "apr", "may", "jun", "jul", "aug",
"sep", "oct", "nov", "dec".
<time> Time as hh:mm[:ss]. For example: 15:44:00.
If a parameter does not apply to the configured DST rule format, simply set this parameter to any
valid value.
clock custom dst ends format
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
clock custom dst ends format (fixed | last-weekday | following-date | preceding-
date)
Set the format of the custom DST rule.
Parameters
<fixed> Rule of the form: The [Day]th of [Month] at [Time].
<last-weekday> Rule of the form: The last [Weekday] of [Month] at [Time].
<following-date> Rule of the form: The first [Weekday] on or after the [Day]th of [Month] at
[Time].
<preceding-date> Rule of the form: The first [Weekday] on or before the [Day]th of [Month]
at [Time].
ntp server
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
ntp server <index><host>
Adds a network time server.
Parameters
<index> Index of the time server in the list. Up to 20 time servers are supported.
Time servers are checked in the order that they appear in the list.
<host> DNS name or IP address of the time server.
ntp server failure trap
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
ntp server failure trap
Send a trap each time a time server synchronization failed.
no ntp server failure trap
Do not send a trap each time a time server synchronization failed.
2-17
To Next Page
Loading...
Need help?
General
