CLI commands
no snmp-server trap config-change
Do not send this trap.
snmp-server trap config-update
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap config-update
Send a trap whenever the firmware is updated.
no snmp-server trap config-update
Do not send this trap.
logging destination
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
logging destination <name>
Creates a new remote destination for syslog.
no logging destination <name>
Deletes the specified syslog destination.
Parameters
<name> Name of syslog destination. Use the name "local" to edit your local log file
settings. Any other name will edit/create a remote log destination.
snmp-server trap syslog-severity
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap syslog-severity
Set the severity level of syslog messages that will trigger a trap.
no snmp-server trap syslog-severity
Do not send this trap.
snmp-server
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server
Enables the SNMP agent.
no snmp-server
Disables the SNMP agent.
snmp-server access port-1
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server access port-1
Enables SNMP access on the downstream port.
no snmp-server access port-1
Blocks SNMP access on the downstream port.
2-19
To Next Page
Loading...
Need help?
General
