CLI commands
soap-server access wireless
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
soap-server access wireless
Enables SOAP access on the wireless port.
no soap-server access wireless
Blocks SOAP access on the wireless port.
soap-server access local mesh
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
soap-server access local mesh <profile>
Enables access to the management tool via the specified local mesh.
no soap-server access local mesh <profile>
Disables access to the management tool via the specified local mesh.
snmp-server trap low-snr
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap low-snr
Send a trap when the average signal to noise ratio on a VAP (VSC) exceeds a specified level.
no snmp-server trap low-snr
Do not send this trap.
snmp-server trap low-snr interval
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap low-snr interval <number>
Sets the interval at which the average SNR level is checked for each VAP (VSC).
snmp-server trap low-snr level
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap low-snr level <number>
Sets the SNR level that will trigger a trap.
snmp-server trap new-association
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap new-association
Send trap on when a new wireless client station associates with any VAP (VSC).
no snmp-server trap new-association
Do not send this trap.
2-27
To Next Page
Loading...
Need help?
General
