CLI commands
Config context
Path: View > Enable > Config
This is the root context for all configuration commands.
certificate
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
certificate (authority | local) <uri> <certname> [<password>]
Add a new certificate to the store, using the friendly name.
certificate binding
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
certificate binding (web-management | html-auth | soap | eap) <certname>
Assign a certificate to a service.
no certificate binding (web-management | html-auth | soap | eap) <certname>
Unassign a certificate from a service.
certificate revocation
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
certificate revocation <uri> <certname>
Add a Certificate Revocation List to an existing authority certificate.
end
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
end
Switches to parent context.
factory settings
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
factory settings
Resets the system configuration to factory default settings.
interface ethernet
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
interface ethernet (port-1|port-2)
Switches to the specified Ethernet interface context.
2-9
To Next Page
Loading...
Need help?
General
