HP MSM3xx

CLI commands
IP_QOS context
Path: View > Enable > Config > IP_QOS
This context provides commands for configuring IP QoS profiles.
end
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
end
Returns to a previous context.
end-port
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
end-port <number>
Specifies the end port to use for this IP QoS profile.
Parameters
<number> End port number. Range: 0 - 65535
priority
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
priority <low | medium | high | very-high>
Sets the priority for this IP QoS profile.
Parameters
<priority> Available priorities are: low, medium, high and very-high.
profile name
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
profile name <name>
Changes the name of the IP QoS profile.
protocol
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
protocol <number>
Specifies the protocol ID use for this IP QoS profile.
Parameters
<number> Protocol number. Range: 0 - 255.
start-port
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
start-port <number>
Specifies the start port to use for this IP QoS profile.
2-76